Skip to main content

Materials

  • Mold star 15 slow cure

    • safety

    • use in properly ventilated area

    • Safty glasses, long sleeves and rubber (vinyl only! Silicon will inhibit the cure of the rubber) gloves

    • store in room temprature (23°C) (warmer reduces shelf life)

    • Mixing container should have straight edges and flat bottom

    • mixing sticks should be flat and stiff

    • product has a limited shelf time!

    IMPORTANT:

    • Avoid contact with eyes, slight transient irritation possible

    • Flush with water 15 min and seek medical attention

    • remove from skin with watterless hand cleaner, then soap and water

  • mold star 30

  • sorta-clear 37

    IMPORTANT:

    • use only with adequate ventilation

  • smooth-cast 326

    • safety

    • store in warm environment (23 °C )

    • liquids are miosture sensitive and will asorb atmospheric moisture

    • mixing container should be clean and made out of metall, glass or plastic

    • mixing in a well ventilated area

    • safety glass, long sleeves and rubber gloves to minimize containment risk

    • test application is recommended!

    IMPORTANT:

    • PART A (YELLOW):

    • contains diphenyldiisocyante

    • vapors can e significant if heated or sprayed may cause lung damage and sensitization

    • only use with adequate ventilation!

    • contact with eye and skin may cause severe irritation!

    • Flush eyes with water for 15min and get immediate medical attention

    • remove from skin with soap and water

    • PART B (BLUE):

    • is irritating to the eye and skin

    • avoid prolonged or repeated skin contact

    • Flush eyes with water for 15min and get immediate medical attention

    • remove from skin with soap and water

  • smooth-cast 305

    • safety

    • wear safety glasses, long sleeves and rubber gloves to minimize contamination risk

    • only in well-ventilated area

    IMPORTANT:

    • PART A:

    • IRRITATING TO EYES, SKIN & MUCOUS MEMBRANES

    • contains Methylene Diphenyl Isocyanate

    • do not get in eyes and mucous membranes

    • do not take internally

    • do not breathe fumes

    • use only with adequate ventilation

    • WEAR CHEMICAL RESISTANT GLOVES AND EYE PROTECTION !!

    • PART B:

    • not that contaiges

    • CAUTION: HOT!!

    • GETS HOT WHEN MIXED (100 °C), cool before handling

General Info about (Shore Hardness Scale)

  • The Shore 00 Hardness Scale measures rubbers and gels that are very soft
  • The Shore A Hardness Scale measures the hardness of flexible mold rubbers that range in hardness from very soft and flexible, to medium and somewhat flexible, to hard with almost no flexibility at all. Semi-rigid plastics can also be measured on the high end of the Shore A Scale
  • The Shore D Hardness Scale measures the hardness of hard rubbers, semi-rigid plastics and hard plastics.

-> copy picture: here is the hardness scale: https://www.smooth-on.com/pw/site/assets/files/30090/durometerchart.png

Material Pot Life Cure time Mix Ratio Useful Temp (max) Useful Temp (min) Heat Deflection Temp Shore Hardness
Mold Star 15 SLOW 50 min 4 h 1:1 232,22 °C -53,89 °C - 15A
Mold Star 30 45 min 6 h 1:1 232,22 °C -53,89 °C - 30A
Sorta-Clear 37 25 min 4 h 1:1 - - - 37 A
Smooth Cast 305 7 min 30 min 1:1 - - 50 °C 70 D
Smooth Cast 326 7-9 min 60 min 1:1 - - 50 °C 72 D
  • important information
    • pot life: wie lang haben wir zeit zwischen zwei komponenten zusammen gemischt haben und ausguss
    • cure time: wie lange brauchts zum aushärten
    • post cure (aber nicht soo wihctig)
    • mix ratio
    • was wenn irgendwer auf haut/ins auge/in mund bekommt
    • welche schutzausrüstung ist benötigt?
      • schutzmaske?
      • fume hood?
      • schutzbrillen?
      • lange ärmel?
Back to top